
Stone that sheds stains and keeps its natural look
Travertine Sealing in Lake Mary, FL
Pool deck and lanai travertine can be sealed against stains, so call (689) 334-1209 for a free estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals travertine around Lake Mary pools and lanais?
A local contractor seals travertine pool decks, lanais and entry floors across Lake Mary, FL, and you hear back within 1 business day, usually much sooner. The estimate costs nothing, and you can say no afterward. To begin, call (689) 334-1209.
Travertine is a limestone that forms around mineral springs, and it is full of natural pits and pores. Those pores soak up sunscreen oil, pool splash, pollen and leaf tannins, then hold them. A penetrating seal slows that without covering the stone in a film. Tell the contractor what the stone sits beside, whether that is a pool cage, an oak or a sprinkler head, when you send in the short estimate form.
Why does travertine need a different sealer than concrete pavers?
Concrete pavers and travertine are two different materials, and a sealer that suits one can hurt the other. Unilock says brick and natural stone need a product chosen for them, and a Central Florida company says limestone calls for a penetrating sealer instead of a surface film. A contractor who treats the two the same is worth a second question. To compare products, call (689) 334-1209.
Limestone reacts to acid
Unilock lists marble, limestone and travertine as acid-sensitive. Granite Gold, a stone-care brand, explains that the calcium carbonate in the stone reacts with acid and leaves a dull or cloudy mark called an etch. The mark is permanent, and it takes a stone restoration specialist to repair. Ask what cleaner a contractor plans to use before you send in the short estimate form.
Film or no film
A film-forming coat sits on top of the stone. Luvohome notes that outdoors it can trap moisture and fail in patches, and an Orlando paver company warns that the wrong coat on natural stone can leave it slippery or peeling. A penetrating sealer soaks in, so the stone keeps its texture. To ask which type is in the quote, call (689) 334-1209.
Water-based or solvent-based
Outercle says water-based products have less odor and easier cleanup, while solvent-based ones often soak deeper. A Central Florida stone company uses a penetrating solvent-based sealer on its travertine work, and Sir Grout offers a water-borne polymer. Either can be right when the label says exterior stone. Have the contractor explain the pick when you send in the short estimate form.

What is included when travertine is sealed in Lake Mary?
A full visit has five parts, and the drying times shape the day. Cleaning comes first because Outercle says a coat sealed over dirt or stains locks them in. To walk through the parts for your stone, call (689) 334-1209.
Walk-through
The contractor notes the finish, the pits and voids, loose pieces, old coatings and any screen enclosure that limits equipment.
Stone-safe wash
A pH-neutral wash and low pressure water lift grime without etching the surface or driving water under tiles.
Pits, voids and joints
Dirt in the natural pits and joint lines is cleaned out, and open joints are refilled.
Penetrating seal
A penetrating sealer made for exterior stone goes on dry stone at the label rate.
Cure and walk-through
You get the drying times, the date furniture can return and the care steps that protect the coat.
Spot treatment
Oil, rust and leaf marks are treated before sealing so they are not locked under the coat.
How do I know my Lake Mary travertine needs sealing?
Stone tells you in three ways: water, color and feel. A contractor can read all three in a few minutes. To book that look, call (689) 334-1209.
Water that darkens the stone
A fresh, sealed surface makes water bead or sit on top. Granite Gold says a dark mark where water lands means the stone is absorbing liquid and the seal is thin. At a pool, that happens first at the edge where wet feet leave the water. Point out those spots when you send in the short estimate form.
Dull, grimy pits
All Surface Rejuvenations Plus says dirt collects in travertine's natural pits and voids where mopping cannot reach. When the surface looks speckled or gray even after a rinse, the pits are full. Cleaning clears them, and sealing slows the refill. To have yours looked over, call (689) 334-1209.
Green film and rust-colored spots
Orlando gets over 50 inches of rain a year, an Orlando paver company says, so damp stone grows algae on shaded edges and under planters. Orange spots usually trace back to metal furniture or irrigation. A contractor can sort which is which when you send in the short estimate form.
Will sealing make a travertine pool deck slippery?
Neither is a given, because finish and product choice control both. Flooring Clarity says honed travertine is smooth and can be slick when wet, while tumbled or brushed finishes grip better. A penetrating sealer leaves that surface alone. Share which finish you have when you send in the short estimate form.
Grip under wet feet
Unilock warns that high-sheen sealers can turn slippery when wet and points to a penetrating matte for traction. A Central Florida company recommends a non-slip additive around travertine pool areas at a small added cost. Ask about grip before the day of the job, and call (689) 334-1209 if you want to talk it over.
What do screened pools, sprinklers and Heathrow rules change?
Lake Mary stone usually lives under a screen cage, near a sprinkler zone or inside a neighborhood with its own rules. Each one changes how a contractor plans the work. To talk through yours, call (689) 334-1209.
Screen enclosures
A cage limits where a surface cleaner and a spray rig fit, and tight access can add labor. A hot water extraction system built for enclosures keeps water and grime from blowing onto the screen. Mention the cage when you send in the short estimate form.
County watering rules and mineral stains
Seminole County bans watering from 10 a.m. to 4 p.m. every day, and the rules cover wells and reclaimed water as well. The county says reclaimed water is colorless and free of the minerals that stain houses, driveways and sidewalks, unlike most shallow wells. Rust-colored marks on stone near a well-fed sprinkler head are worth mentioning on a call to (689) 334-1209.
Heathrow associations
Heathrow is a master planned community with about 30 sub-developments, Wikipedia says, and each one has its own association. Natural-look sealing rarely changes how a lanai looks from the street, but the board still sets the rules. To plan around yours, send in the short estimate form.
Want your Lake Mary travertine sealed?
Call, or send the short form, and a contractor answers within 1 business day and often much sooner.
Free, no obligation
What does travertine sealing cost in Lake Mary?
Budget about $2.00 to $3.50 per square foot for cleaning and sealing travertine, based on an Orlando paver company's published natural stone rate. That is a bit above the $1.50 to $3.00 range for concrete pavers, because the stone needs gentler cleaning and an impregnating sealer. For a number on your stone, send in the short estimate form.
A Central Florida company lists pool decks of pavers or travertine at $1.75 to $3.00 per square foot and sets a $1,000 project minimum, so a small lanai can cost more per foot than a large deck. It also says larger jobs usually cost less per foot. Holding a quote already? Check what it covers, or call (689) 334-1209 for a second look.
Other stone and paver jobs have a sealing guide, a restoration page and a list of every town served.
| Stone area | Typical example | Natural stone sealing ($2.00 to $3.50) | Pool deck rate ($1.75 to $3.00) |
|---|---|---|---|
| 200 sq ft | Entry floor or small lanai | $400 to $700 | $350 to $600 |
| 400 sq ft | One side of a pool deck | $800 to $1,400 | $700 to $1,200 |
| 600 sq ft | Full screened pool deck | $1,200 to $2,100 | $1,050 to $1,800 |
| 900 sq ft | Pool deck, lanai and walk | $1,800 to $3,150 | $1,575 to $2,700 |
The third column multiplies the $2.00 to $3.50 per square foot an Orlando paver company lists for natural stone such as travertine, cleaned and sealed with an impregnating sealer. The fourth column uses the $1.75 to $3.00 a Central Florida company lists for pool decks of pavers or travertine. Both pages were read in November 2026. One of those companies sets a $1,000 project minimum, so the smallest areas can price higher than the math shows. Your own quote may differ.
How often should travertine be resealed in Lake Mary?
Expect a new coat every one to three years on a pool deck, with a yearly check in between. Flooring Clarity calls 1 to 3 years common for pool decks, and an Orlando paver company says sealer on pavers lasts 2 to 4 years with a wash every 12 to 15 months. Sun, splash and use all move that number. To set a schedule, call (689) 334-1209.
What shortens a coat
Full sun, chlorine, salt, sunscreen and heavy foot traffic wear a coat faster. Outercle lists sunscreen, body oils, chlorine and salt among the things a pool deck faces. A shaded lanai can last longer. To plan around your use, call (689) 334-1209.
Can sealing fix etched, chipped or sunken travertine?
No. A seal protects the surface, and it cannot repair damage. Granite Gold says etching needs a stone restoration specialist, and All Surface Rejuvenations Plus lists honing, grinding and void filling as separate restoration work for heavy etching or uneven tiles. Unilock adds that sealing is not a cure for drainage or base trouble. To describe what you see, call (689) 334-1209.
When restoration comes first
Stone with deep scratches, failed coatings or uneven edges needs restoration before any sealer. Sealing over those problems only locks them in. Mention the damage when you send in the short estimate form.

What do sealed stone and pavers look like around Lake Mary?








What is the travertine sealing process, step by step?
The order of work matters more than the product on the label. Skip a step, and the seal locks in the problem. To set a day for yours, call (689) 334-1209.
1. Look at the stone
The contractor identifies the finish, marks stains and checks for loose pieces, open joints and old coatings.
2. Treat stains first
Oil, rust, leaf and algae marks get the treatment that fits each one, since a coat would lock them in.
3. Clean with stone-safe products
A pH-neutral wash and low pressure rinse clear grime from the pits and joints without etching the surface.
4. Refill the joints
Joints are topped up so water has less room to get under the stone.
5. Let the stone dry
The surface must be fully dry, or moisture can cloud a penetrating seal.
6. Seal and walk it with you
A penetrating sealer goes on at the label rate, and you receive the times for feet, furniture and the pool.
Frequently Asked Questions
How much does it cost to seal travertine?
An Orlando paver company lists natural stone such as travertine at $2.00 to $3.50 per square foot, with cleaning and an impregnating sealer included. A Central Florida company lists pool decks of pavers or travertine at $1.75 to $3.00 and sets a $1,000 project minimum. A 400 square foot Lake Mary pool deck therefore lands near $700 to $1,400 before any minimum.
How often should travertine be resealed?
Plan on a check every year and a new coat every one to three years around a pool. One stone-care guide calls 1 to 3 years common for pool decks, and an Orlando paver company puts sealer life on pavers at 2 to 4 years. Sun, foot traffic and splash decide where yours falls.
What kind of sealer do you use on travertine?
A local contractor usually picks a penetrating sealer made for exterior stone. It soaks below the surface, so it leaves the texture and grip alone. Film-forming coats can peel, cloud or turn slick on natural stone, according to an Orlando paver company. Ask for the product name and its data sheet.
How much should I pay for paver sealing?
For pavers, Orlando-area company pages put a clean, sand and seal at $1.50 to $3.00 per square foot. Travertine runs a little higher at $2.00 to $3.50 on one of them, because the stone needs a specialized cleaning and an impregnating sealer. A quote far outside those ranges deserves a question about what it covers.
Will sealing travertine make my Lake Mary pool deck slippery?
Not if the sealer penetrates instead of coating the top. Outercle, a stone-care brand, says a penetrating sealer keeps the stone's texture and traction. A Central Florida company also suggests a non-slip additive around travertine pool areas. A honed finish stays slicker when wet than a tumbled one.
Can acid cleaners be used on travertine?
No. Travertine is limestone, and Unilock lists limestone and travertine as acid-sensitive. Acid causes etching, a dull or cloudy patch that Granite Gold says is permanent and takes a stone restoration specialist to fix. A contractor should use stone-safe products from the start.
Does sealer stop acid marks on travertine?
No. A seal slows stains by slowing how fast liquid soaks in, but Luvohome says it does not stop etching from acids. Wipe-up speed and pH-neutral care still matter. Sealing protects against stains, not against the chemistry of the stone itself.
Is pressure washing safe for travertine around a screened pool?
It can be messy and hard on the stone. All Surface Rejuvenations Plus, a Central Florida stone company, says its hot water extraction was built for screened enclosures and avoids the blowback that standard pressure washing throws around a cage. Ask which method a contractor plans for your lanai.
Do I have to remove old stains before sealing travertine?
Yes. Outercle says never to seal over visible stains, because the coat locks them in and makes later removal harder. A Central Florida company says the same about dirty pavers. Stain treatment comes first, then drying time, then the sealer.
How long before I can use the pool deck after sealing?
A Central Florida company asks for 4 to 6 hours before feet, longer in humid or shaded spots, and about 24 hours before furniture returns. Sealer labels vary, so the product's own data sheet sets the real times. Fresh travertine installs must cure before any sealer goes on.
Does Heathrow have rules about changing how stone looks?
Possibly. Wikipedia says Heathrow holds about 30 sub-developments, and each has its own homeowner association. A penetrating sealer leaves the natural look in place, which makes approval easier, but read your covenants and ask your board if the sheen will change.
Which towns near Lake Mary can get travertine sealing?
A contractor who works Lake Mary also covers the towns below, from Longwood and Casselberry out to Oviedo and DeLand. Each town links to its own paver sealing page. If your street is not listed, call (689) 334-1209.
Ask what your Lake Mary stone needs
Tell a contractor where the travertine sits, and an answer reaches you within 1 business day, usually much sooner.
Free, no obligation
